Enter the explay golf engineering menu. Secret codes for Explay Vega

Function Magic camera allows the owner Explay Fresh expand the capabilities of the main camera. And although this function is far from perfect, in certain situations it can help you take interesting pictures. To select a mode - Magic camera press the corresponding button in photo shooting mode with the main camera.

An easy way to make a backup on an Explay Fresh smartphone through the “native” recovery menu

When working on devices with Android OS, it is highly advisable, in case of unforeseen failures, to make a backup copy of data and user settings - the so-called backup(backup). The easiest way is to do this operation through the menu Recovery, which does not require installation of additional software or Internet connection. You just need to log in recovery and follow a few simple steps.
Instructions for backup in action ( Warning: The battery must be sufficiently charged).

ANDROID secret codes for Explay Vega

DISCLAIMER: This information is intended for experienced users. It is not intended for basic users, hackers, or mobile thieves. Please do not try any of the following methods if you are not familiar with mobile phones. We"ll not be responsible for the use or misuse of this information, including loss of data or hardware damage. So use it at your own risk.

Code: - *#*#4636#*#*
This code can be used to get some interesting information about your phone and battery. It shows following 4 menus on screen:

*Phone information
* Battery information
* Battery history
* Usage statistics

Code: - *#*#7780#*#*
This code can be used for a factory data reset. It"ll remove the following things:

* Google account settings stored in your phone
* System and application data and settings
*Downloaded applications

It"ll NOT remove:

* Current system software and bundled applications
*SD card files e.g. photos, music files, etc.

PS: Once you give this code, you get a prompt screen asking you to click on "Reset phone" button. So you get a chance to cancel your operation.

Code: - *2767*3855#
Think before you give this code. This code is used for factory format. It"ll remove all files and settings including the internal memory storage. It"ll also reinstall the phone firmware.

PS: Once you give this code, there is no way to cancel the operation unless you remove the battery from the phone. So think twice before giving this code.

Code: - *#*#34971539#*#*
This code is used to get information about phone camera. It shows following 4 menus:

* Update camera firmware in image (Don't try this option)
* Update camera firmware in SD card
* Get camera firmware version
* Get firmware update count
WARNING: Never use the first option otherwise your phone camera will stop working and you"ll need to take your phone to service center to reinstall camera firmware.

Code: - *#*#7594#*#*
This one is favorite one. This code can be used to change the "End Call / Power" button action in your phone. Be default, if you long press the button, it shows a screen asking you to select any option from Silent mode, Airplane mode and Power off.

You can change this action using this code. You can enable direct power off on this button so you don"t need to waste your time in selecting the option.

Code: - *#*#273283*255*663282*#*#*
This code opens a File copy screen where you can backup your media files e.g. Images, Sound, Video and Voice memo.

Code: - *#*#197328640#*#*
This code can be used to enter into Service mode. You can run various tests and change settings in the service mode.

WLAN, GPS and Bluetooth Test Codes:
*#*#232339#*#* OR *#*#526#*#* OR *#*#528#*#* - WLAN test (Use "Menu" button to start various tests)

*#*#232338#*#* - Shows WiFi MAC address The MAC address is information about the equipment with which you access the network. As a rule, it is strictly tied to the equipment that provides the connection. If the provider's cable is connected directly to a computer or laptop, then we are talking about network card. If the connection is made using a router or modem, the MAC address will belong to these devices.

*#*#1472365#*#* - GPS test Explay Vega

*#*#1575#*#* - Another GPS test GPS is an abbreviation for the English Global Positioning System, the project was implemented and owned by the US military department and was originally conceived only for military purposes. The main objective of the project is high-precision positioning of various moving and static objects on the ground.

*#*#232331#*#* - Bluetooth test Explay Vega

*#*#232337#*# - Shows Bluetooth device address

*#*#8255#*#* - This code can be used to launch GTalk Service Monitor.

Codes to get Firmware version information:
*#*#4986*2650468#*#* - PDA, Phone, H/W, RFCallDate

*#*#1234#*#* - PDA and Phone

*#*#1111#*#* - FTA SW Version

*#*#2222#*#* - FTA HW Version

*#*#44336#*#* - PDA, Phone, CSC, Build Time, Changelist number

Codes to launch various Factory Tests:

*#*#0283#*#* - Packet Loopback

*#*#0*#*#* - LCD test

*#*#0673#*#* OR *#*#0289#*#* - Melody test

*#*#0842#*#* - Device test (Vibration test and BackLight test)

*#*#2663#*#* - Touch screen version

*#*#2664#*#* - Touch screen test

*#*#0588#*#* - Proximity sensor test

*#*#3264#*#* - RAM version Explay Vega

STANDARD GSM CODES Explay Vega
These codes, dialed from a GSM phone, are used to enable or disable various standard features and services. Some of them duplicate menu functions, some do not.

Legend:
@ = send button (Handset, OK, YES, Navi)
** = enable or activate
* = active
## = turn off and deactivate
# = inactive

CHANGING PIN CODE Explay Vega
Change PIN 1 **04*oldPIN1*newPIN1*newPIN1#@
Change PIN 2 **042*oldPIN2*newPIN2*newPIN2#@
Unblock PIN 1 **05*PUK*newPIN1*newPIN1#@
Unblock PIN 2 **052*PUK2*newPIN2*newPIN2#@

PUK is a code that must be provided by the operator when purchasing a phone or connecting. If this code is missing, or the wrong PUK is entered ten times, your phone will be completely blocked!

SHOW IMEI Explay Vega
Show IMEI *#06# International Mobile Equipment Identifier, or IMEI for short - a unique identifier for each cell phone. It is recorded on the hardware, that is, the phone’s firmware, is not tied to the SIM card in any way and therefore does not change when changing phone number. A unique IMEI number is assigned at the factory during manufacture. IMEI assignment helps mobile operators block equipment and also find its location in their network.

If the code obtained by entering this command and the code on the back cover of the phone do not match, then your phone may be “gray”.

CALL FORWARDING Explay Vega
Deactivate all types of forwarding ##002#@
Deactivate all conditional redirects ##004#@
Activate all conditional forwardings **004*phone_number#@

FORWARD ALL CALLS Explay Vega
Deactivate and Disable call forwarding to another number ##21#@
Deactivate call forwarding to another number #21#@
Set a number and activate call forwarding to another number **21*phone_number#@
Activate call forwarding to another number *21#@
Check the status of call forwarding to another number *#21#@

FORWARDING IN CASE OF NO ANSWER TO THE CALL
Activate call forwarding to another number if the subscriber does not answer **61*phone_number#@
Deactivate and turn off call forwarding if the subscriber does not answer ##61#@
Deactivate call forwarding if the subscriber does not answer #61#@
Activate call forwarding if the subscriber does not answer *61#@
Check call forwarding status if the subscriber does not answer *#61#@

FORWARDING IF THE SUBSCRIBER IS OUT OF COVERAGE AREA
Activate call forwarding to another number if the subscriber is outside the coverage area **62*phone_number#@
Activate call forwarding if the subscriber is outside the coverage area *62#@
Deactivate and disable call forwarding if the subscriber is outside the coverage area ##62#@
Deactivate call forwarding if the subscriber is outside the coverage area #62#@
Check forwarding status if the subscriber is outside the coverage area *#62#@

FORWARDING IF THE PHONE IS BUSY
Activate call forwarding to another number if the phone is busy **67*phone_number#@
Activate automatic call forwarding if the phone is busy *67#@
Deactivate and turn off call forwarding if the phone is busy ##67#@
Deactivate call forwarding if the phone is busy #67#@
Check the status of automatic forwarding if the phone is busy *#67#@

SETTING THE NUMBER OF BEEPING BEFORE ACTIVATING FORWARDING
N = 5-30 (seconds)
Set the number of beeps **61*VoiceMail Number**N#@
Cancel previous installation ##61#@

Change call barring password **03*330*oldPassword*newPassword*newPassword#@
Activate barring of all outgoing calls **33*Password#@
Deactivate barring of all outgoing calls #33*Password#@
Check the status of barring all outgoing calls *#33#@

BARING ALL CALLS Explay Vega
Activate call barring **330*Password#@
Deactivate barring of all calls #330*Password#@
Check the status of barring all calls *#330*Password#@

BARRYING ALL OUTGOING INTERNATIONAL CALLS Explay Vega
Activate barring of all outgoing international calls **331*Password#@
Deactivate barring of all outgoing international calls #331*Password#@
Check the barring status of all outgoing international calls *#331#@

BARRYING ALL OUTGOING CALLS Explay Vega
Activate barring of all outgoing calls **333*Password#@
Deactivate barring of all outgoing calls #333*Password#@
Check the status of barring all outgoing calls *#333#@

BARRYING ALL INCOMING CALLS Explay Vega
Activate barring of all incoming calls **35*PW#@ or **353*Password#@
Deactivate barring of all incoming calls #35*PW#@ or **353*Password#@
Check the barring status of all incoming calls *#35#@ or *#353#@

BARRYING ALL INCOMING CALLS WHEN ROAMING
Activate barring of all incoming calls when roaming **351*Password#@
Deactivate barring of all incoming calls when roaming #351*Password#@
Check the status of barring all incoming calls when roaming *#351#@
Activate call waiting *43#@
Deactivate call waiting #43##@
Check call waiting status *#43#@

SENDING or BANING SENDING YOUR PHONE NUMBER WHEN CALLING
Prevent sending your phone number #30#phone_number@
Allow sending your phone number *30#phone_number@
Check the parcel status of your phone number *#30#

CODES FOR SENDING/BANING NUMBER IDENTIFICATION FOR INCOMING CALLS
Prevent the caller's number from being displayed on your phone *77#
Allow caller ID to be displayed on your phone #77#@
Check the caller number display status on your phone *#77#@

Questions and comments about secret codes for Explay Vega

Ask a question regarding Explay Vega secret codes

Not every person who has their own mobile phone thoroughly understands the various features of their device and the intricacies of its configuration. In particular, many people do not know how to enter the phone’s engineering menu and why they need to do this at all. In fact, the engineering menu often becomes one of the main tools of specialists from various service centers who eliminate all kinds of firmware errors or any malfunctions in internal program devices.

How to login?

Many people have heard about the engineering menu and know that you can enter it, but do not know how. You can enter the engineering menu by dialing *#*#3646633#*#* and pressing the Audio button, or simply by using the specialized MTK Recovery utility.

Audio

There are several categories in this section:

• Set Mode - select a profile.
• Normal Mode - standard profile.
• Headset Mode - mode for using a special headset.
• LoudSpeaker Mode - a mode in which the loudspeaker in the phone is activated.
• Speech Enhancement is a mode in which fully automatic correction of speech signals is carried out.

Before choosing any extreme possible values, you should make sure in advance that this will not cause you to experience any sound problems later. In the vast majority of cases, it is highly not recommended to do this for the reason that maximum settings can provoke the appearance of a rattling effect and a whole range of other interference, and will also create an extra load on the speakers, which provokes their faster failure.

In addition, never forget that before changing any settings, you must write down those that were set by default, so that if any problems arise, you can quickly return them to their original value.

Normal Mode

After you have figured out how to enter the phone’s engineering menu and what its main paragraphs are, go to Normal Mode. Here you will see a menu in which there are four items, among which the first item is the profile number. Paragraph FIR - 0 - should be left and not touched, and then move on to the next characteristics.

Initially, you should configure the overall volume modulation Tone, for which in the corresponding Value paragraph you will need to set optimal value volume and press the Set button. Initially you can set it to 1, or try a variety of options from 0 to 100. The higher the value, the quieter the sound, while 0 is the maximum possible volume. But, as mentioned above, it is highly not recommended to set the value to zero, since the speakers will begin to produce a wide variety of side effects, such as sound rattling and much more.

Now we go to the Type Side tone menu, but here initially it is not recommended to touch anything, since it may happen that during the conversation you will only hear yourself, but not the interlocutor. Or try changing the values ​​at your own risk in different ways. The most suitable characteristics are the following:

• Audio - 1.
• Speech - 1.
• FM - 1.
• Microphone - 1.
• Key-tone - 70.

If it seems to you that the music or radio is playing too quietly in the headphones, then you can slightly adjust the profile for the headset, but do not forget to restart the phone after that so that the settings are saved.

How to change the conversation volume?

The conversation volume changes through the engineering menu as follows:

• Let's go to the menu.
• Select Audio.
• We find the Speech enhancement characteristic, which is responsible for how well we hear the subscriber on the other side.
• Click on the Common Parameter button, and then select Normal Mode.
• Now look at the parameter Parameter (0), after which we set Parameter - 6.
• We begin to edit this parameter and change it from the standard 400 to 1, after which we press the Set key.
• Now audibility will become even more than acceptable, and in some cases you even have to lower the volume (Samsung’s engineering menu often gives this effect).

Headphone volume

By setting the following characteristics, you can adjust the volume of headphones or speakers in the direction you need while watching a video, as well as listening to music or the radio:

HeadSet Mode (type):

• Audio = 10.
• Side Tone = 50.

LoudSpeaker Mode (type):

• FM = 10.
• Side Tone = 50.
• Audio = 15.

Normal Mode (type):

• FM = 10.
• Side Tone = 50.
• Audio = 20.

By setting these characteristics, you will get an acceptable volume while listening to any materials. In particular, this allows you to create both the Samsung engineering menu of modern models and the menu of most other phones.

Service menu

The service menu also has several main items that may be of interest to users:

1.BatteryLog. The engineering menu of FLY and other modern phones allows you to get extremely accurate information about the condition of the battery, including temperature, voltage and other subtle parameters.

2.TouchScreen. A fairly wide parameter that has the engineering menu of FLY and other manufacturers that produce modern touchscreen phones. There are several submenus in this section:

• HandWriting. A fairly simple option is to draw with your finger on the screen, which allows you to check how well the sensors respond to touching them.
• PointVerification. Allows you to diagnose and, when you press the corresponding button, shows whether there are any errors and, if so, how much they deviate from the desired value.
• LineVerification. Almost the same as the previous point, only here lines are drawn from one point to another.
• ShakingVerification. Shake test.

Additional Features

In the Type paragraph, you can also change other characteristics that interest you, from the volume of the speaker during negotiations (Speech) to the volume of keystrokes (Key tone). Again, all parameters must be set to a value between 0 and 255, after which the Set button is pressed, which saves the characteristics. The exact same procedure is also set in Headset Mode if you want to fine-tune the volume of your headphones. If you are a fan of a fairly high volume, which the phone cannot initially provide you with, then in this case the optimal values ​​for you will be from 1 to 5, but not 0.

It is immediately worth noting the fact that these are not specific volume values, but only the principle is described. Specific values will already directly depend on the characteristics of your speaker and microphone, because, for example, the settings provided by the Explay engineering menu can increase the parameters an order of magnitude higher than the capabilities of your phone, as a result of which it may simply break while trying to meet these parameters. Take this into account and try to choose real characteristics that can meet your needs.

How to check?

In most phones, the engineering menu provides a specialized Ring Tone item, which can be used to listen to any standard melodies directly from the engineering menu in order to determine how much we have changed the volume. Of course, it is best to call someone after completing all the settings and check the settings live, but if you are trying to do everything quickly and do not want to spend a lot of time, this function is the most optimal for you.

Increase the volume of conversations

Configuration through the engineering menu of the conversation volume is carried out in the above-described service menu. You can enter it as follows:

1. Dial *#*#3646633#*#*.
2. Install the specialized program Mobileuncle Tools on your phone. The first menu in this program is the entrance to the engineering menu of phones. Using the program is much more optimal than doing everything manually, since there is no need to enter a large number of numbers. After all, only the values ​​that will be optimal sometimes have to be selected within several hours.

After this, you can dial different numbers and check how well you can hear your interlocutor and yourself.

Explay Features

A separate feature of the Explay engineering menu is the Battary parameter, which is responsible for battery levels. This characteristic detects the battery charge level and tells the phone when to turn off the power while charging. Thus, you can slightly increase the battery life of the phone, but you must understand that this also affects the battery life, so changing these characteristics is not always the optimal solution.

It is also worth noting that the new type of phones have a function where, when the battery is low, you cannot call other subscribers. It is in this situation that knowledge of how to enter the phone’s engineering menu to change the battery characteristics may come in handy, which will allow you to use its resource longer on outgoing calls.

Manufacturers of Android smartphones implement and use the engineering menu to test devices. It contains all kinds of tests and device settings that are not available to ordinary users. However, today, knowing the USSD command or downloading the application from PlayMarket, anyone can go to the engineering menu.

Why do you need a hidden engineering menu in Android?

Engineering Menu (Engineering Mode) is essentially a hidden application that developers use to test and set optimal parameters mobile phone or tablet. Specialists check the operation of the sensors and, if necessary, make adjustments to the functioning of system components.

When working with the Android technical menu, be careful - changing some functions leads to malfunctions of the device.

How to enter the menu

To open the menu installed by the manufacturer, activate the dial pad on your smartphone and enter one of the USSD commands presented in the table. After entering the command, the numbers will disappear from the screen, and a menu will open instead.

In the dial pad, enter a combination of numbers and symbols to enter the menu

Table: combinations for launching Engineering Mode

Video: how to work in Engineer Mode

If the code does not work and in a standard way It is not possible to launch the service menu, use third-party applications - you can download them on PlayMarket. Recommended programs - “Launch the MTK engineering menu”, Mobileuncle Tools, Shortcut Master.

The manufacturer menu does not work on some device models with Android 4.2 JellyBean (x.x.1, x.x.2), as well as on Android 5.1 Lollipop. The menu is also invalid when the Cyanogen Mod firmware is installed. In Android 4.4.2, when you reboot, changes made in the application are reset.

“Launch the MTK engineering menu”

The application allows you to open and configure the engineering menu without typing digital commands. Works correctly on MediaTek processors (MT6577, MT6589, etc.) and Android systems 2.x, 3.x, 4.x, 5.x. According to user reviews, the program successfully performs its functions, but after rebooting the smartphone, the settings made using the application are reset.

Mobileuncle Tools program

The functionality of the application is similar to the previous one, but, in addition to accessing the engineering menu, the user has the opportunity to view information about the screen, sensor and device memory, as well as update the firmware, restore the IMEI number and improve GPS. For stable operation, root rights are required.

To enter the engineering menu, select Engineer Mode

Shortcut Master utility

The Shortcut Master program is designed to work with shortcuts and system applications: creating, searching, deleting. It does not have a direct function for entering the engineering menu. But with its help you can view the list of secret commands operating on your device. And by clicking on the name of the command, you will see a drop-down menu in which there will be an item “execute”. Convenient and does not require unnecessary actions.

In the program, call up the additional menu and select Secret code explorer to see a list of codes

Root rights to access the engineering menu

To get to the service menu on some versions of Android, the user must have superuser rights (root). You can obtain rights using specialized applications: Farmaroot, UniversalAndRoot, Romaster SU and others. To get Root access to your device using Farmaroot:

1. Install and run the program. Link in Google Play: https://play.google.com/store/apps/details?id=com.farmaapps.filemanager&hl=ru.
2. If the application supports installing root rights on your device, then you will see a list on the screen possible actions, among them - “Get root”. Select this item.
3. Choose one of the preset root methods.
4. The program will begin installation.
5. At the end of the procedure, you will see a message about the successful installation of root access.

Instructions for obtaining root access through the Farmaroot application

Possible problems and solutions:

• the application closed mid-installation - restart the device and try again;
• root rights are not installed - try installing using a different method (select a new exploit in the application).

What can be configured in the menu

The appearance of the engineering mode and the ability to adjust parameters may vary depending on the tablet or smartphone model. In the menu, users most often adjust the sound, change the camera settings and use the recovery mode. The parameters for adjustment and the procedure are given below. Be careful - menu item names may vary depending on various models devices! You act at your own risk.

Audio: Increase volume level

If your phone does not ring loudly enough, find the Audio section in the engineering menu and go to LoudSpeaker Mode. Select Ring. For each signal level (level 1–6), change the values ​​- set the numbers in ascending order, from 120 to 200. Increase the value in the Max item. Vol - maximum 200. Press the SET button to save the settings.

Sequentially change the maximum volume values ​​for each level

Audio: Increase phone call volume

To enhance the speaker tone for conversations, in the Audio service menu section, select Normal mode and open the Sph item. Set the values ​​for signal levels (level 1–6) from 100 to 150, and the number for Max. Vol. – up to 160.

By adjusting the speaker volume, you will be able to hear your interlocutor better during a call.

To increase the sensitivity of the microphone, go to the menu Audio - Normal mode - Mic. For each level, assign the same microphone sensitivity values, for example, 200. Press the SET button, reboot and check whether the other party can hear you better.

Increased microphone sensitivity will allow the other person to hear you better

Video: adjusting sound parameters in the engineering menu

Battery: Disable unused frequencies

Smartphones quickly consume battery life running applications, maintaining cellular communications and network connections. Using the engineering menu you can increase the battery life.

Modern devices scan several GSM frequencies - 900/1800 MHz and 850/1900 MHz. In Russia there is a pair of 900/1800 MHz, which means there is no need to scan the network at other frequencies. The radio signal for the second pair can be turned off, which will significantly save the charge level.

In Engineer Mode, open Band Mode. Disable unused frequencies by unchecking the corresponding items - PCS1900 and GSM850. If the device supports two SIM cards, open the SIM1 and SIM2 items one by one and execute specified actions in everyone. Press the SET button to save the settings.

Disabled frequencies save battery power

If your smartphone and SIM card operate in 3G networks, disable the networks that are not used in Russia: WCDMA-PCS 1900, WCDMA-800, WCDMA-CLR-850. Press the SET button again.

You can enable scanning of disabled networks by returning to the same menu and checking the boxes.

Camera: photo and video settings

By default, Android devices save pictures in JPEG format. Meanwhile, photographers prefer to shoot and process material in RAW to gain more editing options. The technical menu allows you to select the desired image format.

Find Camera in the menu and select Capture Type. Set the photo format to RAW and press SET. Also in the Camera menu you can increase the size of pictures, set the ISO value, enable shooting in HDR for higher photo detail, and set the frame rate for videos. After changing each parameter, remember to press SET to save the settings.

Recovery Mode

Recovery Mode – analogous to Bios on a computer, allows you to manage the device without logging into Android system. Recovery mode features:

• resetting settings to standard;
• firmware update;
• access to root rights;
• Creation backup copy OS;
• removal of personal data from the system.

In Recovery Mode, do not perform an action if you are not sure what it will lead to. Some commands may harm the device and system.

If the settings are not saved

Users who have access to the technical menu complain that the parameters changed in it are not activated or are reset when the device is restarted.

To activate the settings after changing the parameters, tap on the SET button at the bottom of the screen. If the parameters are reset after rebooting the device, try accessing the technical menu not through the application, but using a digital command.

After setting the settings, do not forget to press the SET button

Service codes for Android devices

In addition to the technical menu, secret USSD codes - combinations of numbers and symbols, which the user types by typing to perform an action - allow you to control the functionality of Android smartphones. Secret codes for different devices are given in the table.

Table: list of secret commands for Android

If for some reason the service code did not work, do not worry - install and run the Secret Codes application (Link on Google Play: https://play.google.com/store/apps/details?id=fr.simon.marquis. secretcodes&hl=ru). The program will analyze the combinations active in the device and offer you a list. You can activate the combination directly in the application with one click on the name.

Not many people know about the existence of a menu in the Android OS with advanced device settings - engineering menu . And someone knows, but doesn’t know how to enter it and what to do with it.
In this article we will show how to enter the engineering menu and some of its capabilities.

You can enter the engineering menu simply by entering a special command (but we must add that this method does not work on all versions of Android and not on all devices)

Command to enter the engineering menu: *#*#3646633#*#*

Also on some versions of Android the command may work *#15963#* And*#*#4636#*#*

Immediately after entering, the command should disappear and the engineering menu should open. But on some devices you will still need to press the "Call" key

If this method does not have any effect, you can use an alternative!

And it consists of installing the program (which, by the way, is freely available on Google Play) " Mobileuncle MTK Tools 2.4.0"

This program will open access to the engineering menu (that is, it will work similarly to dialing a combination*#*#3646633#*#*)

There are a lot of settings there! There is huge scope for experimentation! Almost EVERYTHING can be debugged and adjusted!

For clarity, let’s briefly look at setting the device’s volume level:

Go to the program ---> select the "Engineer Mode" section

Because We are interested in adjusting the sound level, select ---> "Audio"

And voila, the menu we are interested in opens.

Max Vol - the same for the entire subsection, as a rule, it is set to 150 (you can change 0-160 - it changes if you select the Media item in the subsection).

If in some submenu, for example, Audio - Normal - Sph general level is not available for regulation, then enter another subsection, for example, Audio - Normal - Media - there you will be able to adjust the overall volume level.

Sub-items:
Sph - volume levels during telephone conversations,
Mic - microphone sensitivity levels,
Ring - ringer volume,
Media - volume when playing music, movies, and games.

Ring volume levels are set in Audio - LoudSpeaker - Ring
Max Vol = 150
Levels: 120 130 145 160 180 200 (starts to wheeze more)

Phone speaker conversation volume levels in Audio - Normal - Sph
Max Vol = 150
Levels: 100 120 130 135 140 145 150

Microphone conversation volume levels in Audio - Normal - Mic
Levels: 100 172 172 172 172 172 172

Media volume levels are set in Audio - LoudSpeaker - Media

Levels: 110 130 160 190 210 230 250

All the same can be configured for the Headphone mode, by analogy:

Speakerphone volume levels are set in Audio - LoudSpeaker - Sph
Max Vol = 150 (it is the same for the entire section)
Levels: 80 100 110 120 130 140 150 (more wheezing starts)

Now all volumes are adjusted within adequate ranges.
If you are not satisfied with the volume levels, you can set your values ​​(than more value, the greater the volume when adjusting the volume keys, or the greater the sensitivity of the microphone)

By analogy, you can configure most sections! Experiment!